常用防爆類型修理和檢驗的技術要求要點（一）
隔爆型電氣設備的防爆安全原理是通過隔爆外殼從而實現防爆安全。在_防爆標準當中，其定義為“隔爆外殼 d”。Flameproof explosion-proof electrical equipment safety principle is realized through the flameproof explosion-proof security enclosure. Among the international standards for explosion proof, which is defined as "explosion-proof enclosure d".
在隔爆型電氣設備中，隔爆外殼一般是由殼體﹑蓋﹑緊固件﹑以及穿越殼壁的操縱桿或轉軸等組成。作為隔爆設備的殼體與蓋大多都是較厚的材質，同時在滿足相關標準規定之后，_能夠承受住在外殼內部的爆炸時不會被損壞。同時如若承受住爆炸時產生的拉力不會對固定隔爆外殼的緊固件產生斷裂與拉伸變形的狀況，螺釘﹑螺母等緊固件__具備足夠的機械強度。
對于外殼上的_接合面或結構間隙等問題，應_外殼內部的可燃性混合物爆炸時產生火焰不會被傳到外殼外部，因?yàn)榇藢?duì)于接合面的寬度（L和L1值）﹑間隙（W）和表面粗糙度都_滿足防爆標準的規定。
In flameproof electrical equipment, explosion-proof enclosure is generally covered by the shell ﹑ ﹑ ﹑ fastener and through the shell wall of the joystick or the shaft and other components. As flameproof equipment are thicker shell and cover most of the material, while the provisions of relevant standards are met, you must be able to withstand internal explosion of the shell will not be damaged. Should the same time withstand the pull of the explosion will not produce proof shell fasteners fixed to crack and tensile deformation conditions, screws and other fasteners ﹑ nut must have sufficient mechanical strength.
For the case of any joints or structural gaps and other issues, should protect the shell exploded inside the combustible mixture to produce a flame will not be passed to the external shell, as this for the width of joints (L and L1 values) ﹑ gap (W ) and the surface roughness must meet explosion-proof standards.